Hot Sale 😍 Empress Effects Phaser Pedal 🎉

Redefining the phaser effect from the ground up, Empress Effects has created a phaser pedal unlike anything else on the market. Employing a unique VCA based design, the Empress Effect Phaser offers unparalleled signal-to-noise ratio. Choose between 2 stage, 4 stage or an Empress exclusive 3 stage mode; all controllable via tap tempo sweeping through an impressive set of 8 waveforms.

The Empress Phaser Pedal is the next generation in the evolution of digitally-controlled analog technology. It features an all-analog signal path but is controlled by a microprocessor, allowing it to maintain all its character and analog flavor while adding a ton of possibilities for control and adaptability. Sure, it does the classic jet sounds, super funky auto-wah and ring modulators, as well as having vibrato and Univibe sounds on tap. But what really sets the Empress Phaser Pedal apart are the auto modes: envelope following, audio-triggered sweeps, rhythms and direct control are just a few of the settings found on the Empress Phaser Pedal.

Features:

• Killer Sound Quality – The Signal to Noise ratio is around 104 dB
• 8 Auto modes – Envelope follower, center & speed, speed(sine), speed(square), audio sweep trigger, random level trigger, rhythms and direct control
• Tap Tempo with Ratios – Use tap tempo to set the phasers speed; the ratio selection makes fast tempos and triplet based phase times easy
• 2 / 3 / 4 Stages – Select 2, 4 or, an empress exclusive, 3 stages
• 5 Rhythms – Rhythms let your phaser boldly go where no phaser has gone before
• Ultimate Control – Control over width, speed, resonance, waveform, and number of stages
• 8 Waveforms – Phase through sine, triangle, asymmetric sine, swung sine, sawtooth, reverse sawtooth, square and step waveforms
• True Bypass – The Empress Phaser Pedal employs true bypass, so you can be sure that it’s not affecting the signal when disengaged
• Gain – Set the output gain of the phaser to match your bypassed signal or use up to 6dB of boost to really drive your preamp
• Small Size – The enclosure measures approximately 4.5″ by 3.5″ by 1.5″, which is delightfully small when considering all the features packed into this unit
• Unsurpassed Connectivity – The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI all using a standard 1/4″ jack
• True Display LEDs – Extremely responsive LEDs always let you know what the phaser is doing and help you adjust the sensitivity in the auto modes

Specifications:

• Power Input Voltage: 9 – 18 V DC (negative tip)
• Power Input Connector: 2.1 mm barrel connector (negative tip)
• Power Consumption : ~120mA
• Enclosure Material: Die Cast Aluminum
• Input connector: 1/4″ jack
• Output connector: 1/4″ jack
• Height (Enclosure only): 1.5″
• Height (including controls): 2″
• Depth: 3.5″
• Width: 4.5″
• Weight: 1 lb